Suitable for work activities that require insulation work.
Same basic functions and features as Preset type RNTD with external insulated body:
Withstanding voltage AC1000V
Prevents electric shock accidents.
When set torque value is achieved, rotary slip prevents over-torque.
Preset style is ideal for applications which requires the same torque value on the line.
Octagon-shaped body prevents driver from rolling.
Applicable for international use including the EU region.
Compliant with calibration procedures of ISO6789 Type II Class D.
Accepts standard 1/4 hex root bit type (sold separately) Bits are not insulated.
DO And Dont Do
Do use fluid and steady motion. Jerking or unsteady movement may damage the driver.
Do inspect the driver before each use, and ask a Tohnichi-authorized repair center to inspect or repair it if any parts are missing or damaged.
on't modify the driver, or use a driver that has any modifications except those approved by Tohnichi. Other modifications will weaken the driver, or cause inaccuracy, as well as causingdamage or possible injury.
o take care to avoid shocks or jolts, including dropping the driver. Damage or deformation may result, and accuracy and durability will be reduced.
Do use only parts approved by Tohnichi for repair and maintenance of the torque driver. Ask your place of purchase, an authorized repair center, or contact Tohnichi for assistance in obtaining parts or repairs.
Do not use the torque driver in the rain, high temperature or high humidity, this may result in malfunction due to the rust.
Do not use the torque driver where there are high levels of dirt or dust.
Do not turn the inner tube counterclockwise above red line.
Do use with an insulated glove at the time of work.
Proper use of torque wrench
Cheek the setting of the driver before use.
The driver is set at the minimum torquen setting when shipped.
Do not set torque below minimum scalemtorque.
se the driver within the scale range.
Make sure that the proper measurement unit (kgf.cm, kgf.m, NM, lbf.in, etc.) is used in setting the driver.
Since this model is rotary slip clutch type mechanism, over-torquing is eliminated. But, idle extra clicks will result in clutch engagement wearing and may shorten durability.
Select a proper bit to adapt to the slit of the screw head. If the size of bit is not correct, the screw head may be damaged by the bit.
Avoid submersion in water. Water will cause damage to internal components and ruin the driver.
Torque drivers are required periodical inspection.
Before using or storing the driver, or whenever necessary, remove all debris, oil, water, etc. Keeping the driver clean will prolong its life.
1. Remove the End Cover.
2. Torque Setting.
Hold the grip of t he Driver in hand,insert Adjusting Bar into the slit of Adjusting Screw and turn Adjusting Bar. When turning Adjusting Screw clockwise, torque will increase. Use TDT3-G torque driver tester to set the desired torque. (Adjusting Bar is optional accessory.)
3. Replace the End Cover.
4. Insert the bit into the adapter of the Driver. (Select the required bit from the table for bits.Bit is optional accessory.)
5. Insert the tip of the bit into slit of screw head.
6. Turn the Torque Driver clockwise to tighten.
7. Tightening is completed when a click is felt.
RNTDZ model is rotary slip clutch type.
We do undertake Servicing and repairing of Tohnichi RNTDZ Insulated Screwdriver TQC Sheen Range of products throughout india
Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.
We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi RNTDZ Insulated Screwdriver Products in Chennai, Assam, Madurai, Coimbatore, Nagaland, Kerala, Manipur, Mizoram, Haryana, Sikkim, VIsakhapatnam, Tirchy, Hosur, Anjaw, Tumkur, Mysore, Kolkatta, Salem, Poonamalle and etc..