TQC Sheen Bird-Type Flim Applicators, Single Gap

TQC Sheen Bird-Type Flim Applicators, Single Gap

TQC Bird-type film applicator with one flat edge. One application side for applying 1 pre-defined thickness. The TQC Bird-type applicator single gap is available in film width 50 and 75 mm and suitable for applying a host of different products onto flat and relatively solid substrates. The high-grade stainless steel will not be affected by acid or base elements.

We can not give guarantee of the wet thickness that will be obtained. The wet thickness is dependent upon the solids and vehicle content of the wet material as well as other factors. Film thickness deposited may vary from 40% to 80% of the actual gate clearance of the TQC Bird-type film applicator.

Specification
Material : DAIDO 440C medical grade Martensitic stainless tool steel. Sub Zero Vacuum hardened (+1756°C to -70°C), hardness HRC 55 (through hardened*) & tempered.
Surface treatment : polished
Overall accuracy : ± 2 μm
Accuracy : better than 3 micron
Outer dimensions : 80 x 25 x 15 mm (50mm series) 105 x 25 x 15 mm (75mm series)
*Through hardening versus Case-hardening or surface hardening.

Through-hardening means the metal uniformly is hardened throughout the piece. Case- or surface (face / frame) hardening only hardens the top layer of the metal. Once the top layer is degraded excessive wear and tear will occur on the product limiting its life time and affecting accuracy.

Use
Select the gap-side and place this side of the applicator on a plane smooth surface such as a glass plate. Apply a sample of paint in the centre of the TQC Prism applicator near the opening. Draw down the applicator over the surface. Due to physical reasons the max. film attainable wet film thickness is not equal to the gap depth. Deposited film thickness may vary from 40% to 80% of the clearance/gap depth. Dry film thickness will be lower than wet thickness due solvent/water evaporation.

Special Care
• Though robust in design, this instrument is precision-machined. Never drop it or knock it over
• Always clean the instrument after use.
• Only use non-corrosive solvents to clean the instrument. Use a soft, non-abrasive cloth to dry it.
• Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive cleaning agents, permanent damage.
• When stored for a long period of time, wrap the instrument in oil paper
• We recommend annual calibration.

We do undertake Servicing and repairing of TQC Sheen Bird-Type Flim Applicators, Single Gap TQC Sheen Range of products throughout india

Apart from supplying TQC Sheen Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are TQC Sheen Authorized Distributors, Importers, Stockists, Dealers and Suppliers of TQC Sheen Bird-Type Flim Applicators, Single Gap Products in Chennai, Wayanad, Gujarat, Odisha, Rajasthan, West Bengal, Tripura, Palakkad, Kanyakumari, Theni, Krishnagiri, Namakkal, Sivagangai, Perambalur, Dharmapuri, Erode, Pudukottai and etc..