Tohnichi Marking Torque Wrench

Tohnichi Marking Torque Wrench

Features
error-proofing marking torque wrench. Lets you make direct visual checks for bolt tightening errors.
When the torque wrench is activated the bolt head is marked.
Oversight preventable by quick visual check on the bolts.
Marking is not done until set torque is achieved.
Marking stays on by use of quick dry ink.
Extending the socket with the extension bar permits tightening and marking in deeply inset places.
Ink cartridges are easy to install inside specialized socket.
Only hand force required for tightening a bolt and marking the bolt simultaneously.
One refill of ink is capable of approximately 6,000 times of stamping.
Height of the stamp is adjustable (±5 mm).
Applicable for international use including the EU region.
Compliant with ISO 6789 Type II Class B calibration procedures.

Marking Torque Screwdriver:
The first of its kind! This innovative torque screwdriver puts an ink mark on the screw head to indicate that it has been tightening to the correct torque.
When the set torque is achieved, its integrated maker automatically puts an ink mark as evidence of proper tightening on the heads of small screws and bolts. This makes it easy to determine whether tightening has been missed by just visually confirming the presence or absence of marks.
It is common to use a pen to mark work after tightening with a torque screwdriver, but with a Tohnichi marking tool the two actions are combined into one, improving productivity and reducing the chance of error.
When set torque is achieved, marking is done automatically, eliminating the possibility of an operator otherwise forgetting to mark work.
The clearly identifiable quick drying ink mark provide evidence of tightening to the required torque, and this evidence remains even after manufacturing and shipping.
One marker (sold separately) can mark about 1,000 times. Selection of two colors: red and blue.
Marker positioning is adjustable to accommodate a wide variety of bolts and screws. (* For further details, refer to the PDF catalog.)
Lineup includes a total of 7 types of Phillips (+) and hex bits for MNTD series products. (Sold separately)
Markings on bolt and screw heads can be detected in image form using an industrial level CCD camera, permitting unmanned inspections.

Interchangeable open end head marking torque wrench. When the set torque is reached, the wrench automatically leaves a mark on nuts (bolts) to provide evidence of proper tightening.

The MCSP is a preset type interchangeable open end head marking torque wrench. It automatically marks a corner of the nut (or bolt) on the side, when the set torque is reached.
Conventionally, the tightening and marking procedure is a two-step process: (1) Tighten with a torque wrench; then (2) Make a mark with a pen. Tohnichi's MCSP prevents a mark from being made if tightening was forgotten.
Preset head is ideal for successive tightenings at the same torque.
MCSP series torque wrenches come in a selection of three body types, permitting tightening torque applications from 10 to 140 N • m.
MSH15D series interchangeable heads for the MCSP series offer a selection of 14 sizes. Interchangeable open end head dimensions (width across flats) of nuts (bolts) range from 12 to 32 mm.
MSH15D series open end interchangeable heads are more compact than those in the regular SH series, making them useful for marking where dimensions are restricted.
Uses a disposable marker, so no need for ink refills. One marker performs about 2,000 markings. Marker replacement is easy. Also suitable for vertical marking.

We do undertake Servicing and repairing of Tohnichi Marking Torque Wrench Tohnichi Range of products throughout india

Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi Marking Torque Wrench Products in Kerala, Goa, Himachal Pradesh, Ernakulam, Bangalore, Guntur, Pondycherry, Nagapattinam, Vandavasi, Kanpur, Lucknow, Rajapalayam, Sikkim, Ooty, Thrissur, Madurai, Jaipur and etc..