Tohnichi Data Tork Digital Torque Wrench

Tohnichi Data Tork Digital Torque Wrench

Tohnichi Data Tork Digital Torque Wrench

CEM3-G series is the digital torque wrench designed for "Retightening torque measurement" "Loosening torque measurement" as well as for precision tightening.

Features
Industrial Grade Digital Torque Wrench Ideal for Quality Inspections
Robust and durable aluminum body.
Two Mode Selection: Measuring Mode for quality inspections of already tightened fasteners or Tightening Mode for applying torque
Dual LED and LCD Displays
LCD screen is viewable under the direct light, while LED screen is vivid in dark places.
Easily select unit of measure by keypad. Certificate supplied in SI units.
999 Data Memory Capacity with torque value, time/date stamp, and count
Automatic or Manual Save Modes
Set up Menu Selection: Measuring/Tightening Mode, Unit of Measure, Clock, Date, Data Output, Baud Rate, Hi/Lo Judgments, Buzzer, Auto- reset timer
Supplied with Interchangeable Ratcheting Square Drive Head. A variety of other head types are sold separately
Includes Rechargeable Battery and Charger
Export data with Cable (sold separately)
Included with cable purchase is Excel Receiver Software that allows data to be transferred into an Excel® Spreadsheet. (*Note: Excel® is a registered trademark of the Microsoft Corporation).
Bluetooth Models Also Available: See Model CEM3-G-BT
With CE mark. For international use including the EU region.
Ergonomically designed and adapted for Color Vision Deficiencies (Tohnichi Unified Design).
Applicable for international use including the EU region.
Compliant with calibration procedures of ISO 6789 Type I Class C.

Components
(1) Interchangeable head
Picture above shows attached QH interchangeable head. Tohnichi head SH, RH, QH, RQH, DH, HH, FH are also available.
PH cannot be used.
(2) Protection cover
This cover protects from scratch and breakage.
(3) Liquid crystal display (LCD)
It shows clock, remaining battery, counter, and auto memory condition on dual display mode. It shows counter, auto memory, remaining battery, unit, and torque value on LCD display mode.
(4) 7segment LED display
It shows torque value on dual mode. LED will be off in LCD mode.
(5) Unit display
It shows torque unit.
(6) Tightening completion, judgment OK/NG LED
Green LED turns on for tightening completion (OK) and red LED turns on for NG.
(7) : Power button
Switch to power on and off.When power is on, do zero check on torque measurement.
(8) : Counter send key
Send a counter one by one or continuously to read out the measured data.
Keep pushing to fast-forward.
(9) : Counter return key
Reverse one counter or continuously to read out the measured.
Keep pushing to fast-forward.
(10) Terminal cover
This cover protects each terminal from dust and debris.
(11) : Mode key
When counter 000: Push it for 2 seconds to enter settings.
When counter 001-999: Push it to process the measured data (max, min, ave, etc).
(12) : Memory key
Saves the measured data and proceed to the next counter. Transfers the data to external device.
(13) : Clear key
Clear saved measurement data (measurement value,date). On run mode do auto zero adjustment.
(14) Grip
Battery pack (BP-5) is stored inside.
(15) Cap
Remove this cap when exchanging batteries (counter clockwise).
(16) Charge jack
Connect BC-3-G charger to this jack for charging.
(17) External output terminal
Connect USB cable (No. 584) to this terminal.
(18) Infrared output window
Terminal to transfer data to Tohnichi infrared data receiver R-DT999.
(19) Reset button
Push reset button display error or malfunction happens.
No need to push every time after charging.

Explanation of each mode
Memory mode
M-3 mode: M-3 is set as delivery setting. M-3 mode can save max.999 pc of data and the measured time. However, M-3 mode is not compatible with Tohnichi data filing software (DFS).
M-2 mode: M-2 is compatible with the old CEM2 model. M-2 mode can save only 99pc of data (same as CEM2). However, M-2 mode is compatible with the same Tohnichi data filing software (DFS) which was used by CEM2.

Display mode
Dual mode: Dual mode is set as delivery setting. It uses 2 displays (LCD and LED) to display torque value, counter, measured time, etc.
LCD mode (Power saving mode): Only LCD display is used and LED is turned off to save electricity.

Measurement mode
MODE-M (Inspection mode): MODE-M is set as delivery condition. This mode is used for retightening and loosening inspection.
MODE-T (Tightening mode): This mode is used for tightening operation. When it reaches the lower limit torque value, green LED lamp turns on and the alarm goes off.

Data sampling mode
Run mode: When the counter is 000(M-3 mode) or 00 (M-2 mode), it is in Run mode. In Run mode, the display shows the torque value being applied at the moment and returns to zero when torque is released.
Peak mode: When the counter is 001-999 (M-3 mode) or 01-99(M-2 mode), it is in Peak mode. In Peak mode, the maximum torque will be captured and the display hold this maximum torque value.

We do undertake Servicing and repairing of Tohnichi Data Tork Digital Torque Wrench Tohnichi Range of products throughout india

Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi Data Tork Digital Torque Wrench Products in Chennai, Assam, Madurai, Coimbatore, Nagaland, Kerala, Manipur, Mizoram, Haryana, Sikkim, VIsakhapatnam, Tirchy, Hosur, Anjaw, Tumkur, Mysore, Kolkatta, Salem, Poonamalle and etc..