Tohnichi Side Marking Torque Wrench For Hex Screws

Tohnichi Side Marking Torque Wrench For Hex Screws

Tohnichi Side Marking Torque Wrench For Hex Screws

A mark is made on the tightened cap screw and an adjacent location on your work. This lets you check for subsequent loosening. A marking torque wrench for tightening cap screws, which prevents human tightening errors.

Upon reaching the set torque the marker is designed to stamp on the bolt and work.
Because the stamped mark is put on the side of the bolt and the work piece, it can not only prevent missed tightening but also detect loosening of bolts.
The marker is designed to stamp only when the torque wrench operates upon reaching the set torque.
Marking stays on by use of quick dry ink.
One refill of ink is capable of approximately 3,000 times of stamping.
Marker is ink cartridge type.
Only hand force required for tightening a bolt and marking the bolt simultaneously.
Applicable for international use including the EU region.
Compliant with ISO 6789 Type II Class B calibration procedures.

The torque setting can be easily viewed and changed by turning end knob to move the scales.
Because of its easy torque setting style, it can be susceptible to unauthorized or inadvertent changes to the torque setting.
Ideal for applications that require a variety of torque settings using one tool.
Because there are no scales, a torque tester and a specialized adjusting or thrust ring tool are required to set the torque value.
Ideal for mass assembly applications where one torque setting is dedicated to one tool.
Since this type requires additional equipment to change the torque, it prevents the torque setting from being changed by unauthorized personnel.
Preset styles have lower maintenance costs compared to other types of torque tools due primarily to the fact that there is no scale to maintain and calibrate.

Tools that require thrust ring tool have an end cap that must be removed and a thrust ring screw that is loosened, then thrust ring tool is used to fit into two holes to moved CW or CCW to increase or decrease torque value. For tools that take adjusting keys, the key fits directly into the end of the tool. The wrench is checked against a torque tester to verify torque value. Adjustments are made until the required setting consistently shows on the torque tester.

While holding the driver, insert adjusting tool bar into the grooves at the base of the handle. Turn CW to increase torque and CCW to decrease. Confirm value by checking on torque driver tester. Adjust and recheck until target torque is consistently achieved.

We do undertake Servicing and repairing of Tohnichi Side Marking Torque Wrench For Hex Screws Tohnichi Range of products throughout india

Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi Side Marking Torque Wrench For Hex Screws Products in Chennai, Wayanad, Gujarat, Odisha, Rajasthan, West Bengal, Tripura, Palakkad, Kanyakumari, Theni, Krishnagiri, Namakkal, Sivagangai, Perambalur, Dharmapuri, Erode, Pudukottai and etc..