Tohnichi SF/F Beam Type Torque Wrench

Tohnichi SF/F Beam Type Torque Wrench

Features
Direct reading beam type for tightening and measuring.
Highly durable classic style torque wrench
Light weight, easy-to-read scale, suitable for inspection.
Graduated in clockwise and counterclockwise directions, and applicable for retightening and loosening torque inspection methods.
The unique shape of the arm is designed to keep the internal force at stable level without any friction, which contributes to enhanced durability.
F model grip is shaped to conform to the hand in order to prevent slipping.
Applicable for international use including the EU region.
Compliant with calibration procedures of ISO 6789 Type I Class A.

Operating Procedure
SF/F/QF model operating instruction
Make sure that the main pointer stays at on the scale plate.
Insert the square drive of the wrench into the required sockets.
Apply the socket on to bolt.
Apply force to the center of the handle and measure the torque value while watching the scale plate.
For models with a memory pointer, change the lever position based on the measuring direction.
For QF models, make sure that the position of the measuring direction.

Operating instructions for F/QF models
Attach the extension handle to the main wrench.
Take off the fix screw on the main wrench.
Insert the extension handle and tighten the fix screw to prevent loosening.
Confirm that the main pointer is aligened with the position.
Insert the squere drive of the wrench into the required socket.
Apply the socket on to a bolt head or nut.
Apply force to the center of the handle and measure the torque value while watching the scale plate.
For QF models, make sure that the position of the rachet lever is correct based on the measuring direction.

Operating instructions for CSF.CF models
Make sure that the main pointer stays at '0' on the scale plate.
Attach the required interchangeable head (optional) to the torque wrench.
Apply a head, socket or Allen-key on to a bolt head or nut.
Grip the center of the handle and apply force gradually in measuring direction while watching the scale plate.

Warnings
Don't use this wrench except for tight-ening purposes. This is a torque wrench for bolt tightening only.
Make sure there is no oil, or grease on the grip. A slip of the hand while tightening, may cause an accident or injury.
Check for cracks,scratches and rust. These will cause damage to the wrench and may result in an injury.If such conditions exist,have a functional test performed and repair if necessary.
Make sure when moving the ratchet lever that it is in its correct position.(QF type) If the ratchet lever is only moved half way, the ratchet will be damaged, and that will cause an accident or injury.
When you use this wrench in a high location, prepare to prevent dropping the wrench. If you drop the torque wrench or socket,that may cause a serious accident or injury.
Don't use a pipe to extend handle. This will cause damage to the torque wrench and create an accuracy error.

Precaution For Use
Confirm that the torque is set according to the correct unit of measure before using. (kgf􀉾cm, kgf􀉾m, N􀉾m, etc)
Don't use torque wrench in fresh water or sea water. The inside mechanism will go bad and cause an accident or injury.If you drop in water or sea water,get it checked out or repaired.
Use the correct socket that fits the hex size of the bolts,you are using. If you use an incorrect socket,this may cause an accident or injury.
Measurement precision is affected by the grip position. A mark is provided on the handle surface to indicate the effective length.
Make sure there is enough clearance for your hand and elbow before using to prevent injury.
Don't use the torque wrench as a hammer. If there's a deformation on the beam,an operation failure could result and cause a decrease in the accuracy of the torque wrench.
Perform regular inspections for function and accuracy. Periodical inspections are essential to insure the torque wrench is in optimal condition thus preventing injury.
Loading direction. The loading direction must be at right angles to the torque wrench (tolerance: 􀊶15􀋃) This tolerance applies to both horizontal and vertical deviation.
Remove any dirt such as dust,mud,oil and water,etc.after each use and before storing torque wrench.
When storing the torque wrench for a long time, apply rustproof oil, and keep in a dry place. If improperly stored, the accuracy and durability will decrease rapidly.
Apply force to the center of handle to float the handle on a pivoting pin, which concentrates the total force to the effective length.

We do undertake Servicing and repairing of Tohnichi SF/F Beam Type Torque Wrench Tohnichi Range of products throughout india

Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi SF/F Beam Type Torque Wrench Products in Chennai, Wayanad, Gujarat, Odisha, Rajasthan, West Bengal, Tripura, Palakkad, Kanyakumari, Theni, Krishnagiri, Namakkal, Sivagangai, Perambalur, Dharmapuri, Erode, Pudukottai and etc..