Tohnichi Titanium Type Adjustable Torque Wrench
Tohnichi Titanium Type Adjustable Torque Wrench
Tohnichi Titanium Type Adjustable Torque Wrench
Features
Titanium pre-lock torque wrench
Approx. half the weight of standard torque wrenches.
Applicable where ordinary torque wrenches are difficult to use because of weight such as overhead.
The set torque cannot be changed without using a hex key (standard accessory), preventing the operator from changing torque by mistake.
Preset type with scale, suitable for single purpose torque tightening tasks where scale gradations are required.
A clear "click" sound signals tightening completion upon reaching the set torque.
The ratchet head has 24 teeth with a 15 degree operating range, allowing for use in space-limited working conditions.
Comfortable resin grip for 180N - 360N models.
Applicable for international use including the EU region.
Compliant with calibration procedures of ISO 6789 Type II Class A.
Proper use of torque wrench
Check the setting of the wrench before use. The wrench is set at the minimum torque setting when shipped.
Do not set torque below minimum scale torque.
Use the wrench within the scale range.
Make sure that the proper measurement unit (kgf.cm, kgf.m, NM, lbf.in, etc.) is used in setting the wrench.
Avoid submersion in water. Water will cause damage to internal components and ruin the wrench.
Only use a socket in the proper hex size for the bolt being tightened.
The torque wrench handle has an effective-length mark, which must be used to grip it in the proper place. Improper grip position will reduce accuracy.
A click will signal that the proper amount of torque has been applied. Pay careful attention, and stop tightening when the click is heard or felt.
Use the torque wrench only where there is sufficient clearance and freedom of movement. You may select another wrench, if necessary.
Never use the torque wrench as a hammer or mallet.
Have the torque wrench inspected periodically by someone qualified for that purpose to insure accuracy and proper functioning.
Torque wrenches are required periodical inspection.
The loading direction must be at a right angle to the torque wrench. The tolerance is plus/minus 15 degrees of horizontal or vertical deviation.
Before using or storing the wrench, or whenever necessary, remove all debris, oil, water, etc. Keeping the wrench clean will prolong its life.
If the wrench must be stored f or long periods, set the wrench at the minimum torque, apply rust-proofing oil, and store the wrench in a dry place. Improper storage may cause damage to the wrench, and reduce the accuracy.
How to set the torque
TiQL･TiLQL･TiEQL
1. Insert a Allen wrench into a adjusting hole.
2. Turn the Allen wrench clockwise to add torque value, and turn counter-clockwise to reduce torque value. Read main and supplementary graduation for your desired torque value.
Usage
Set the proper torque.
Refer to “How to set the torque.”
Insert the square drive into a socket, making sure it is the proper size for the bolt or nut being tightened.
Place the socket onto the bolt head or nut.
Turn the wrench clockwise to fasten the bolt or nut.
Tightening is complete when a click is heard or felt.
We do undertake Servicing and repairing of Tohnichi Titanium Type Adjustable Torque Wrench Tohnichi Range of products throughout india
Apart from supplying Tohnichi Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.
We DFT TECH, are Tohnichi Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Tohnichi Titanium Type Adjustable Torque Wrench Products in Bagalkot, Bihar, Tiruvannamalai, Villupuram, Cuddalore, Dharwad, Delhi, Amristar, Tirupur, Vellore, Punjab, Chattisgarh, Jharkhand, Viruthachalam, Ambala, Dindugul, Chitoor and etc..
