PI Tapes L2MM 1000mm - 2000mm Linear Rule Metric Tapes

PI Tapes L2MM 1000mm - 2000mm Linear Rule Metric Tapes

PI Tapes L2MM 1000mm - 2000mm Linear Rule Metric Tapes

Description
Linear Rule Width: 12.7mm Continuous
Vernier Scale Width: 12.7mm
Material: Blue Easy to Read 1095 Spring Steel
Thickness: 0.38mm
Accuracy: ± .2mm

Example
Make certain the linear rule, vernier section and object to be measured are clean.

Each line on the linear rule represents 1mm, while each line on the vernier represents .1mm.

Place the linear rule on a at surface. Slide the linear rule alongside the part to be measured. Line up the zero end of the linear rule (left end) with the end of the part to be measured. Make certain the left end of the rule and the left end of the part to be measured line up exactly.

Line up the vernier scale portion of the linear rule at the point where the part being measured ends. This will place the zero on the vernier scale exactly at the right end of the part to be measured.

Locate the Zero-edge of Vernier scale and note the highest value achieved on linear rule above it (the highest value to the left of Vernier scale). In this example, the value is 1073mm.

Next, determine which vernier line is aligned exactly with a marked division line on the linear rule. In this example, the value is 3 (.3mm).

Finally, to obtain the linear reading of the object, simply add the two values together: 1073mm + .3mm = 1074.3mm

As a suggestion for checking very large measurements – pieces of masking tape can be used to hold the rule and vernier section in the proper parallel position.

Care
Tape is delicate, handle with care. Keep tape clean and dry.
After each use, wipe clean and apply a light rust preventive oil*. Store in tape container and in a low moisture environment.
* White Easy to Read tapes Stainless or 1095 Spring Steel - Do not oil or use solvents to clean this product.
White Easy to Read 1095 Spring Steel must be stored in a low moisture environment to prevent rust.
No periodic adjustments are needed.
Make sure the tape has not been stepped on or kinked, which may destroy the accuracy

PI Tapes L2MM 1000mm - 2000mm Linear Rule Metric Tapes PI Tapes Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying PI Tapes products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are PI Tapes Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Whatman Quartz Fiber Extraction Thimbles Products in Chennai, Pune, Bengaluru, Mysore, Mumbai, Noida, Indore, Nagpur, Mangalore, Surat, Ghaziabad, Faridabad, Gurgaon, Coimbatore, Nashik, Tiruvallur, Karur, Kancheepuram, Vellore and etc..