PI Tapes DL5SS 4000mm - 5000mm ("157.480 - 196.850") Digital Linear Tape

PI Tapes DL5SS 4000mm - 5000mm ("157.480 - 196.850") Digital Linear Tape

PI Tapes DL5SS 4000mm - 5000mm ("157.480 - 196.850") Digital Linear Tape

Description
Base Section: 50.8mm (2.0")
Linear Section: 25.4mm (1.0")
Material: 716 Stainless Steel
Thickness: 0.50mm (.020")
Accuracy: ± .13mm (± .005")

TO Assemble Linear Tape:
To uncoil: Remove lament tape from 1" wide section of linear tape and lay at with black stator strip facing up
. NOTE: This 1" section will take about 2 minutes to straighten flat.
Lay 2" piece on at surface so that squared edge is to your left with digital unit facing up.

Slide rounded edge of 1" section through the guide of 2" wide base, sliding left to right direction. Continue to slide rounded edge beneath digital unit and then through remaining guide.

The orientation of assembled tape is that squared edges of both pieces are to your left. Black stator strip facing upward.

Summary Of Functions For Digital Device:
Digital device is capable of providing measurements for inch linear and with a push of a button, device will display metric linear.

NOTE: Device incorporates the use of a diameter equivalent in both inch and metric for those customers who need to verify diameter tapes in a linear fashion.

Instruction For Use:
1) Make sure the squared edge of 1" wide linear strip lines up exactly with squared edge of the 2" wide base (2" base is meant to be stationary).
2) Turn on digital unit by pushing right button until dashes are displayed.
3) Push right button until "SET" is displayed. Digital unit should now display the measurement that corresponds with the programed setting.
4) Take readings by moving 1" wide section leftward until measurement is achieved. The left button is multi-functional. Pressing it repeatedly will display the dierent measurement modes. The measurement modes oered are metric linear, metric diameter, inch linear, and inch diameter.
5) When not in use, digital unit turns o automatically after approximately 5 minutes.

NOTE: If digital unit needs to be reset or error message is shown, turn o digital unit by pressing right button until all characters disappear. Then repeat steps 2 through 4.

The linear display has a resolution of .01mm (.0005") with an overall tape accuracy of ± .13mm (± .005").

PI Tapes DL5SS 4000mm - 5000mm ("157.480 - 196.850") Digital Linear Tape PI Tapes Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying PI Tapes products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are PI Tapes Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Whatman Quartz Fiber Extraction Thimbles Products in Chennai, Pune, Bengaluru, Mysore, Mumbai, Noida, Indore, Nagpur, Mangalore, Surat, Ghaziabad, Faridabad, Gurgaon, Coimbatore, Nashik, Tiruvallur, Karur, Kancheepuram, Vellore and etc..