PI Tape DT6SS 60” - 72” Outside Diameter/Circumference Tape

PI Tape DT6SS 60” - 72” Outside Diameter/Circumference Tape

Description
Base Section: 2.0" (50.8mm)
Tail Width: 1.0" (25.4mm)
Material: 716 Stainless Steel
Thickness: Base Section .020" (0.50mm) / Body .010" (0.25mm)
Accuracy for Outside Diameter: ± .003" (± .09mm)
Accuracy for Outside Circumference: ± .009" (± .24mm)

Instructions
1) Insert the tail of the tape through the window at the head of the tape, then slide the tail underneath the digital unit to prepare for setting up lines (listed on step 3 below).
NOTE: Use care when sliding the stator strip underneath the digital unit.
2) Turn on the digital unit by pushing the right button until the dashes are displayed.
3) Position the tape so that the set-up line on the head of the tape lines up exactly with the 72” set-up line on the tail of the tape.
4) Push the right button until “SET” is displayed. The digital unit should now display the measurement that corresponds with the set-up line.
5) Take the readings while applying 5 lbs. tension. The left button is multi-functional. Pressing it repeatedly will display the dierent measurement modes. The measurement modes oered are metric circumference, metric diameter, inch circumference, and inch diameter.
6) When not in use, the digital unit turns o automatically after approximately 5 minutes.

Instructions for Battery Change:
The top surface of the black digital housing has a small hole in it through which a small pointed scribe can be used to remove battery.
Insert the pointed end of scribe into the hole and press it against the battery.
Next, pivot the scribe so that the battery will slide towards the open slot in the black casing and remove the old battery.
To install a new battery, use a small pair of needle nose pliers (or tweezers) to grasp the battery at its edges and carefully push the battery into the slot, with the + symbol facing upward.
Part number for battery is CR2032.

PI Tape DT6SS 60” - 72” Outside Diameter/Circumference Tape PI Tapes Range of products are mostly available in ready stock and it can delivered immediately throughout india

Apart from supplying PI Tapes products in India through dealers network, catering to a variety of customers ranging from Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are PI Tapes Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Whatman Quartz Fiber Extraction Thimbles Products in Salem, Coimbatore, Lucknow, Chandigarh, Bhopal, Madurai, Chennai, GandhiNagar, Visakhapatnam, Ahmedabad, Virudhunagar, Krishnagiri, Thanjavur, Kodaikanal, Tenkasi and etc..