Lutron EMF-827 EMF TESTER,separate probe

Lutron EMF-827 EMF TESTER,separate probe

FEATURES
The EMF tester is designed to provide user a quick, reliable and easy way to measure electromagnetic field radiation levels around power lines, home appliances and industrial devices. Wide measuring ranges, 3 ranges of 20 micro Tesla, 200 micro Tesla & 2000 micro Tesla. The EMF tester is a cost effective, hand-held instrument designed and calibrated to measure electromagnetic field radiation at different bandwidths down to 50 Hz/60 Hz. Separate probe, easy operation.

GENERAL SPECIFICATIONS
Display :13mm (0.5") LCD, 3 1/2 digits. Max. indication 199.9.
Range /Resolution :20 micro Tesla/0.01 micro Tesla, 200 micro Tesla/0.1 micro Tesla, 2000 micro Tesla/1 micro Tesla
1 micro Tesla = 10 mili-Gauss
Band width :30 Hz to 300 Hz.
Number of Axes :Single axis.
Accuracy :(4 % + 3 d) - 20 micro Tesla range. (5 % + 3 d) - 200 micro Tesla range. (10 % + 5 d) - 2000 micro Tesla range.
* Spec. accuracy tested under 50 Hz or 60 Hz.
* Spec. tested under the environment RF Field
Strength less than 3 V/M & frequency less than the 30 MHz only.
Over-input :Display shows '1' .
Sampling Time :Approx. 0.4 second.
Battery :DC 9 V battery (006P, 6F22).
Power Current :Approx. DC 2 mA.
Operating Temp. :0 蚓 to 50 蚓 (32 蚌 to 122 蚌).
Operating Humidity :Max. 90% RH(0蚓 to 35蚓). Max. 80% RH(35蚓 to 50蚓).
Weight :285 g/0.63 LB (including battery).
Dimension Main meter :163 x 68 x 24 mm(6.4 x 2.7 x 0.9 inch).
Probe :175 x 45 x 22 mm(6.9 x 1.8 x 0.9 inch).
Accessories Included :Operation Manual

MEASURING PROCEDURE
Place the " Off/Range Switch " to the suitable range. For the unknown EMF measurement, start with the highest range and keep decreasing until the higher resolution's reading is obtained. Due to the electromagnetic interference of the environment, the display reading may show small values before testing, for example less than 0.05 micro Tesla. This is not malfunction of the tester.

Hold the " Sensor Probe " move the " Sensor " Head " slowly towards to the object under measurement until it is physically touched. Notice how the field intensity increases as you move closer to the object. Position the " Sensor Head " at different angles to the object under measurement and observe how this may affect your reading of the meter. By trying different angles approaching the object under measurement, recorder the highest value shown on the display.

If the object under measurement is turned off during the measurement, the EMF tester reading should then return to zero, unless a field from other sources are detected. The meter are designed to read the display unit of " micro Tesla " directly. However if intend to know the measurement reading value by " mili-Gauss ", then just multiply the factor by " 10 "

For example : * If display reading is 11.43 micro Tesla. Then the reading value for " mili- Gauss " will be 114.3 (11.4 x 10).
* If display reading is 118.2 micro Tesla. Then the reading value for " mili- Gauss " will be 1182 (118.2 x 10)

We do undertake Servicing and repairing of EMF-827 EMF TESTER,separate probe lutron Range of products throughout india

Apart from supplying Lutron Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are Lutron Authorized Distributors, Importers, Stockists, Dealers and Suppliers of EMF-827 EMF TESTER,separate probe Products in Chennai, Bangalore, Hyderabad, Pune, Mumbai, Delhi, Calcutta, Ahmedabad, Sricity, Ambattur, Guindy, Sriperumputhur, Oragadam, Tiruvallur, Trivandrum , Coimbatore, Tiruchy and etc..