LabThink i-Leaktek 6600 Leak and Seal Strength Tester

LabThink i-Leaktek 6600 Leak and Seal Strength Tester

i-Leaktek 6600 Leak and Seal Strength Tester, is applicable to quantitative determination of seal strenth, leakage and burst pressure of flexible packages, aseptic packages and other packages that are processed by heat sealing and hot tack.

Technical Specifications
Test Range :1.5 ~ 600 KPa; 0.22 ~ 87.0 psi
0.004 ~ 1.6 MPa; 0.58 ~ 232.1 psi (optional)
Resolution :0.1 KPa
Test Accuracy :±0.25%FS
Gas Injection Head :Φ10 mm (standard)
Φ4 mm, Φ1.6 mm (optional)
Gas Supply Pressure: 0.5 ~ 0.7 MPa
(outside of supply scope)
Port Size :Φ8 mm PU Tubing
Instrument Dimension :300 mm (L) x 310 mm (W) x 180 mm (H)
Dimension of Testing Platform :305 mm (L) x 356 mm (W) x 325 mm (H)
Power Supply :220VAC 50Hz / 120VAC 60Hz
Net Weight :23 kg

Note 1: The parameters in the table are measured by professional operator in Labthink laboratory according to relative requirements for laboratory standard conditions.
Note 2: The described product features, test standards and configurations should be in line with Technical Specifications.
Note 3: DataShieldTM provides safe and reliable data application support. Multiple Labthink instruments can share one single DataShieldTM system which can be purchased as required.

Standards
This leakage tester/seal strength tester conforms to various national standards and international standards:
ASTM F1140, ASTM F2054, ISO 11607-1, ISO 11607-2, GB/T 10440-2008, GB 18454, GB 19741, GB 17447, GB/T 17876, GB/T 10004, BB/T 0025, QB/T 1871, YBB 00252005, YBB 00162002

Basic Applications
Film Materials :Test the ability to withstand pressurization stress of the completely sealed or three-sided sealed and one-sided open packages made of plastic films, aluminum films, paper-plastic or aluminum-plastic composite films

Pilfer-proof Closures :Test seal performance of various pilfer-proof closures, e.g. closures used for packages of Coke, mineral water, beverage, edible oil, sauce (soy, vinegar and cooking wine), three-piece cans (beer and beverage), and paper cans (cylinder shape for potato chips )

Aerosol Valves :Test seal performance of various aerosol valves, e.g. vales of pesticide, hair spray, auto spray paint and medical spray packages

Flexible Tubes :Including various flexible tubes used in daily chemical products and other industries, e.g. flexible tubes of toothpaste, face cream, cosmetics, pharmacies and food

Medical Blister Packs :Test the ability to withstand pressurization stress of medical blister packs

Air Bags and Air Cushions :Test the seal performance of the air bags or cushions, e.g. air bag restraint system, life saving device and air cushion for transportation

Infusion Bags or Bottles :Test the seal performance of the medical infusion bags or bottles

Sterilized Bags :Test the seal performance of the sterilized bags for medical purpose (LSSD-01P Fixtures for Open Package Unrestrained Test is required)

Extended Applications
Quantitative Closed Package Restraining Test Measure the heat seal strength, the quality of heat seal, the burst pressure and the seal-leakage characteristics of each heat seal edge of flexible packages that are made by various kinds of heat seal technologies. It is internally pressurized and enclosed within restraining plates, such as the packages and laminated packages of food and medicines. LSSD-01R Fixtures for Closed Package Restraining Test is required.

One-sided Open Flexible Package Test the burst strength, seal performance and failure resistance of the one-sided open packages made by heat seal processing. LSSD-01P Fixture for Open Package Restraining Test is required

Pilfer-proof Closures Test the index between torque and airproof, capsule disengaging strength, stress force of materials and the data of airproof, press resistance and burst resistance for whole bottles. LSSD-01C Fixture for Plastic Pilfer-proof Closure Test is required

Flexible Tubes For the quantitative testing of leak characteristics, compression resistance, capsule disengaging strength, cap body joint strength, seal-edge seal strength and butting strength of flexible tubes, for example medical polythene/ aluminum/ compound polythene tubes/ aluminum medical tubes/ cosmetic flexible tubes. LSSD-01F Fixture for Flexible Tube Test is required.

Aerosol Valves For quantitative measurement of fluency, leak pressure, leak rate, seal performance and pressure resistance of aerosol valves. LSSD-01A Fixture for Aerosol Valve Seal Performance Test is required.

Features

Professional Functionality
Positive pressure method and two testing modes including restrained inflation and unrestrained inflation
Standard test methods including Burst Test, Creep Test and Creep-to-Failure Test
Two test ranges are available, which can maximally be extended to 1.6 MPa and meet the requirements of different materials
Various accessories for package testing both qualitatively and quantitatively
Display test parameters and test results in multiple units

High-end Design
Embedded computer control system provides safer and more reliable data management as well as test operation.
The instrument can be easily operated with a mouse, a keyboard, and a monitor, without requiring a PC.
The instrument is equipped with four USB ports and dual Internet ports for convenient data transmission.
Universal power input for easy access

Intelligent Software
Interface: Windows-based operating interface
Statistics: easy calculation for historical results, instrument usage, energy consumption, and large statistical information
Data Comparison: by presetting target value and range, the system automatically generates data comparison after each test and intelligently judges whether the specimen passes or fails the test
Test Report: can provide detailed test reports in various customized patterns
User Management: multi-level account management for better data management and protection
Operation Log: system automatically records all the operations by the user, which is easy to review
The instrument supports Labthink’s exclusive DataShieldTM Note3(Optional), which can provide the users with reliable management of test data and test reports.

Standard Configurations
Instrument, Professional Software, Monitor, Keyboard, Mouse, Test Frame, Printer

Optional Parts
LSSD-01R Fixture for Closed Package Restraining Test, LSSD-01P Fixture for Open Package Unrestrained Test, LSSD-01C Fixture for Plastic Pilfer-proof Closure Test, LSSD-01F Fixture for Flexible Tube Test, LSSD-01A Fixture for Aerosol Valve Seal Performance, DataShieldTM Note3

We do undertake Servicing and repairing of LabThink i-Leaktek 6600 Leak and Seal Strength Tester labthink Range of products throughout india

Apart from supplying labthink Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are labthink Authorized Distributors, Importers, Stockists, Dealers and Suppliers of LabThink i-Leaktek 6600 Leak and Seal Strength Tester Products in Kerala, Goa, Himachal Pradesh, Ernakulam, Bangalore, Guntur, Pondycherry, Nagapattinam, Vandavasi, Kanpur, Lucknow, Rajapalayam, Sikkim, Ooty, Thrissur, Madurai, Jaipur and etc..