LabThink MED-01 Medical Packaging Tester

LabThink MED-01 Medical Packaging Tester

Technical Specifications
Load Cell Capacity :250 N (standard) 50 N, 100 N, 500 N (optional) 750 N, 1000 N (Customization Available)
Accuracy :Better than 0.5% FS
Test Speed :Forward:10, 50, 100, 150, 200, 300 mm/min (standard)
Backward:10, 50, 100, 150, 200, 300 mm/min (standard)
Number of Specimens :1
Specimen Width :30 mm (Standard Grip)
50 mm (Optional Grip)
Clamping Way :Manual Specimen Clamp
Stroke :500 mm
Instrument Dimension :365 mm (L) x 585 mm (W) x 960 mm (H)
Power Supply :220VAC 50Hz / 120VAC 60Hz
Net Weight :8 kg

Principle
The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven up and embedded displacement transducer. The relative parameters of force properties can be obtained by further calculation.

Standards
This test instrument conforms to the following standards: ISO 37, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB14232.1-2004, GB15811-2001, GB/T1962.1-2001, GB2637-1995, GB15810-2001, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, QB/T 2358, QB/T 1130, JIS P8113, YY0613-2007, YBB00042002, YBB00112004

This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications:

Basic Applications
Tensile Test
Test of Tensile Strength and Elongation Rate
Test of Tensile Strength at Break
Tear Resistance Test
Heatseal Strength Test
90 Degree Peel Test
Fastness Performance Test of Hypodermic Needle and Needle Hub
Compression Test of Plastic Blood Bags
Puncture Test of Rubber Closures
Break Test of Ampoule Bottles
Sliding Resistance Test of Hypodermic Syringe
Seal Performance Test of Hypodermic Syringe
Puncture Test of Hypodermic Needle
180 Degree Peel Test
Fastness Performance Test of Hypodermic Needle Cap and Needle Hub

Extended Applications (Additional Accessories Required)
Seal Performance Test of Hemostix
Opening Force Test of Jelly Cups and Yogurt Cups
Tear Test Using Trouser Method
Peel Test of Release Paper
90 Degree Peel Test of Adhesive Tapes
Tensile Stress Test of Ropes at Break
Pullout Test of Cosmetic Brush Hair
23 Degree Pullout Test of Bottle Caps
Tear Resistance Test of Adhesive Binding Books
Compression and Deformation Test of Foams
Pullout Force Test of Rubber Closures
Unwinding Force Test of Adhesive Tapes
Peel Test of Protection Films
Opening Resistance Test of Combined Covers
Puncture Test of Plastic Films
90 Degree Peel Test of Magnetic Cards
Pullout Test of Toothbrush Hair
Opening Force Test of Oral Liquid Caps
Peel Test Using Floating Rollers

Professional
MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges. The instrument is designed with 16 independent test modes and bidirectional test mode of stretching and compression, which can meet various test requirements.

Better than 0.5% of full scale effectively ensures accurate test results
16 independent test modes are available, including compression force, tensile strength, and peel strength of medical appliances and foams
Professional pressure sensor monitors the internal pressure change during the test of force properties
The system supports bidirectional test mode of stretching and compression, and 6 test speed can be freely selected based on user requirements
Intelligent designs of over-travel protection, overload protection, and automatic position reset for safe test operation

Intelligent
This instrument utilizes Labthink's latest embedded computer control system and operating software, with user-friendly operating interface and intelligent data management. It also supports LystemTM Lab Data Sharing System, which ensures uniform management of test results and test reports.

Embedded computer control system provides safer and more reliable data management as well as test operation
The system can be easily operated by a standard monitor, a mouse and a keyboard; without requiring a PC
The system is equipped with four USB ports and dual Internet ports for convenient input, output and data transfer
Status monitoring and intelligent reminding of sensor calibration ensure instrument in the best working condition
Historical data back up and management functions for diversified data analysis
The system uses the high performance processor core and large storage space, which can conduct data comparison and analysis for 50 parallel tests at the same time
Multi-level account control for better data management and protection
Embedded help document for user viewing at any time
Supports LystemTM Lab Data Sharing System for uniform and systematic data management

Standard Configurations
Instrument, Professional Software, Standard Monitor, Mouse, Keyboard and Universal Grips

Optional Parts
Load Cell, Standard Pressure Roller, Test Plate, Sample Cutter, Floating Roller, Customized Grips, Lystem Lab Data Sharing System, Printer(compatible with PCL3) and Other Test Accessories, e.g. Penetration Test of Rubber Stoppers in Antibiotic Bottles and Hypodermic Needles, Fracture Strength Test of Ampoule Bottles, Leak Test of Plastic Packages under External Pressure, Connection Force Test between Hypodermic Needle and Needle Hub, Connection Force Test between Hypodermic Needle and Needle Cap, Sliding Resistance Test of Pistons, Leak Test of Plastic Packages and Low Speed Unwrapping Device

We do undertake Servicing and repairing of LabThink MED-01 Medical Packaging Tester labthink Range of products throughout india

Apart from supplying labthink Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are labthink Authorized Distributors, Importers, Stockists, Dealers and Suppliers of LabThink MED-01 Medical Packaging Tester Products in Bagalkot, Bihar, Tiruvannamalai, Villupuram, Cuddalore, Dharwad, Delhi, Amristar, Tirupur, Vellore, Punjab, Chattisgarh, Jharkhand, Viruthachalam, Ambala, Dindugul, Chitoor and etc..