Defelsko PosiTest AT Pull-off Adhesion Testers

Defelsko PosiTest AT Pull-off Adhesion Testers

Defelsko PosiTest AT Pull-off Adhesion Testers

Measures adhesion of coatings to metal, wood, concrete and other rigid substrates.

Select from four Stand-offs - 20 mm, 50 mm, 50x50 mm Tile and 50 mm C1583
Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
Calibrated and certified to ± 1% accuracy using a NIST traceable load cell
Certificate of Calibration showing traceability to NIST included (Long Form)

Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4642/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others

Simple
Inexpensive, single-use dollies eliminate cleaning for re-use and can be kept as a permanent record
10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths

Durable
Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65

Accurate
Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
Calibrated and certified to ± 1% accuracy using a NIST traceable load cell

PosiTest AT-A Automatic
Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process User adjustable pull rate, pull limit and hold time

Internal memory stores maximum pull-off pressure, rate of pull, test duration, dolly size, pass/fail, nature of fracture and user notes for 100,000 pulls in up to 1,000 batches Impact and scratch resistant color touch screen with keypad for operation with or without glove
Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android)

Key Features
Electronically controlled hydraulic pump automatically applies smooth and continuous pull-off pressure. Greatly reduces user effort and the risk of influencing the pulling process Impact and scratch resistant color touch screen with keypad for operation with or without gloves
Built-in rechargeable battery performs over 200 tests per charge. Continue testing with AC power while the battery recharges.
Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
Rubberized, shock absorbing grips provide a stable, skid-resistant footing
Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths. Maximum pull-off pressure by dolly size...
- 10 mm: 14000 psi (96 MPa)
- 14 mm: 7000 psi (50 MPa)
- 20 mm: 3500 psi (24 MPa)
- 50 mm: 560 psi (3.8 MPa)
User selectable measurement units: psi (pounds per square inch), MPa (Megapascal), Nmm2 (Newtons per millimeter square) or Newton (force)
User adjustable pull rate, pull limit and hold time
Rotating display for horizontal and vertical use
Pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
Software Updates via web keep your instrument current

Memory and Reporting Features
Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for 100,000 pulls in up to 1,000 batches
Record the results as pass/fail and the nature of fracture - cohesive, adhesive and glue failures
Wirelessly connect to your smart device using our free PosiTector App (Apple iOS and Android)
WiFi technology wirelessly communicates with PosiSoft.net, downloads software updates and allows access to stored measurement data using standard web browsers (see WiFi Features for full details)
PosiSoft USB Drive - stored readings and graphs can be accessed via USB using universal PC/Mac web browsers or file explorers. No software required
Compatible with PosiSoft Desktop, PosiSoft.net and PosiTector App (Apple iOS and Android) software solutions

Recording the Nature of the Fracture
Upon completion of a pull-off test, the dolly and coated surface should be examined. In addition to pull-off force, many National and International standards such as ASTM D4541 and ISO 4624 require the nature of the fracture to be recorded.

Cohesive fracture: fracture occurs within a coating layer (same coating on dolly face and coated surface).
Adhesive fracture: fracture occurs at the interface between layers (coating on dolly face differs from surface).
Glue failure: visible separation of the glue from itself, the coating or dolly (no coating visible on the dolly face).

The cohesive and adhesive fracture visual analysis can be recorded using the PosiTest AT-A's keypad or touch screen display. Alternatively, the information can be reported using the PosiTector App.

Fractures are visually estimated and recorded as a percent of each. The two layer example below illustrates a cohesive fracture within coating layer 1 and layer 2 (visually estimated at 50% each). Recorded results are included in reports.

The PosiTest AT-A can record fracture information for up to five layers. For full details and examples see Visual Analysis and Recording of Test Results.

PosiTest AT-M Manual
Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
Pull Rate Indicator to manually monitor and adjust the rate of pull
Internal memory stores maximum pull-off pressure, rate of pull, test duration and dolly size for up to 200 pulls
Compatible with PosiSoft Desktop for viewing, printing and storing measurement data

Key Features
Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke
Pull Rate Indicator to manually monitor and adjust the rate of pull
Environmentally sealed enclosure – weatherproof, dustproof and shockproof - meets or exceeds IP65
Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces
10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths
- 10 mm: 10000 psi (70 MPa)
- 14 mm: 6000 psi (40 MPa)
- 20 mm: 3000 psi (20 MPa)
- 50 mm: 480 psi (3.3 MPa)
- 50x50 mm: 375 psi (2.585 MPa)
Every PosiTest Adhesion Tester pressure system is calibrated and certified to ± 1% accuracy using a NIST traceable load cell
Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls
Compatible with PosiSoft Desktop software for viewing, printing and storing measurement data
Software Updates via web keep your instrument current

Adhesion testers include everything needed for testing: Manual Adhesion Tester, built-in rechargeable NiMH battery with charger, dollies, abrasive pad, cutting tool, glue with mixing sticks and palettes, cotton swabs, USB cable, PosiSoft Software, instruction booklet and video, Certificate of Calibration traceable to NIST, two-year warranty, and a sturdy, lightweight carrying case^

Optional 20mm/50mm/50 mm C1583/50 mm Tile Conversion Kits allow each model to be used with alternative dolly sizes. Custom 10 and 14 mm dollies are available for special applications (compatible with 20 mm stand off).

Upgrade to the Pelican® case by adding a '-P' to the Ordering Code.

Conforms to international standards including ASTM C1583/D4541/D7234/D7522, ISO 4624/16276-1, EN 1542/12004-2, AS/NZS 1580.408.5 and others

We do undertake Servicing and repairing of Defelsko PosiTest AT Pull-off Adhesion Testers defelsko Range of products throughout india

Apart from supplying defelsko Electrical Testing products in India through dealers network, catering to a variety of customers ranging from Atomic energy, Electricity Boards, Electrical Laboratory, Shopping Complexes, Shopping Mall, Electrical Contractors, Engineering Industries, Turnkey Construction Companies, Railways, Defence Installations, Research Laboratories, Educational Institutes and various Research and Development laboratories of leading national and multinational companies.

We DFT TECH, are defelsko Authorized Distributors, Importers, Stockists, Dealers and Suppliers of Defelsko PosiTest AT Pull-off Adhesion Testers Products in Bagalkot, Bihar, Tiruvannamalai, Villupuram, Cuddalore, Dharwad, Delhi, Amristar, Tirupur, Vellore, Punjab, Chattisgarh, Jharkhand, Viruthachalam, Ambala, Dindugul, Chitoor and etc..